Insulation Contractor in Salinas, CA - Attics and Crawl Spaces Done in the Right Order
Soledad Spray Foam Insulation insulates and air seals attics, walls and crawl spaces in Salinas homes, rentals and businesses, and pulls out old insulation that's soaked or dirty before anything new goes in.
- Fully licensed and insured.
- Free on-site estimates.
- We respond within 1 business day.
Insulating Salinas houses, old and new
Salinas is the biggest city we work in, and the calls cover a lot of ground: older houses with a few flattened inches in the attic, newer tract homes with a room over the garage that never feels right, and some shops and offices. We're an insulation contractor in Soledad, CA, an easy drive away, and it's the same attic, wall and crawl space work we do in Gonzales and Greenfield.
In the older houses I want to know what's wrong before we add anything, because new insulation over a leak, droppings or a bad wire just hides the problem. Your price and schedule turn on what's up there now, whether it has to come out, how much sealing it needs and whether a permit is involved, and the written estimate lays that out for your house.
- Problems found before anything goes in
- Soaked or dirty insulation taken out
- Gaps sealed before the attic is filled
- Eave vents left clear to breathe
What we do in Salinas
Here's the work we take on in Salinas, from one drafty room to a whole house or a shop building.
Spray foam insulation
Spray foam fills odd-shaped framing and seals air as it insulates, so it suits Salinas rooflines and older walls where rolled insulation never fit tight.
Explore Spray foam insulationAttic insulation
Older Salinas attics often hold a few flattened inches, so we check for leaks and droppings, seal the gaps, then build it back up evenly.
Explore Attic insulationBlown-in insulation
Blown-in insulation, loose fill sent through a hose, is how we usually top up a tract-home attic, keeping it as deep at the edges as the middle.
Explore Blown-in insulationHome insulation
If your whole Salinas house feels drafty, I look at the attic, walls and crawl space together, then line up the fixes in the right order.
Explore Home insulationInsulation removal
In older Salinas houses, insulation that's been soaked or is full of droppings comes out before anything new goes in, and we haul it away.
Explore Insulation removalCrawl space insulation
Cold floors over a Salinas crawl space usually mean missing or sagging insulation under the subfloor, so we check for damp first, then insulate between the joists.
Explore Crawl space insulationWall insulation
Some older Salinas houses have little or nothing in the walls, so I check what's in there before we fill them through small holes we patch afterward.
Explore Wall insulationAir sealing services
Air sealing, closing gaps before we insulate, is where a drafty Salinas house starts, around plumbing holes, wiring runs and the crawl space.
Explore Air sealing servicesBasement insulation
When a Salinas house has a basement or a below-grade room, we check for seepage before insulating the walls, so nothing traps water against the concrete.
Explore Basement insulationClosed-cell foam insulation
Closed-cell foam, a dense foam that blocks moisture, is what I'd pick for a damp crawl space or a metal shop building in Salinas.
Explore Closed-cell foam insulationOpen-cell foam insulation
Open-cell foam is the softer, lighter foam, good for Salinas rooflines and walls where you want air sealed and noise cut and moisture isn't the worry.
Explore Open-cell foam insulationCommercial insulation
Salinas shops and offices get the same order as a house, with problems found and gaps sealed first, then insulation planned around the people working there.
Explore Commercial insulationCrawl space vapor barrier
Under Salinas houses with damp dirt crawl spaces, we lay a plastic vapor barrier over the ground and lap the seams so moisture stays down.
Explore Crawl space vapor barrierVapor barrier installation
On a Salinas remodel, we check which side of the wall a vapor barrier belongs on before it goes up, because on the wrong side it can trap water.
Explore Vapor barrier installationAttic air sealing
In Salinas attics we seal around the hatch, pipes, wires and can lights before insulating, so the new material isn't fighting a draft from the rooms below.
Explore Attic air sealingRetrofit insulation
Retrofit work adds insulation to a finished Salinas house without a remodel, filling walls, topping up attics and insulating floors, usually while you keep living there.
Explore Retrofit insulation
Ask for your Salinas estimate
Tell us which room or space is bothering you and what you've noticed, and we'll reply within one business day to set up a free, no-obligation estimate at your house.
What Salinas houses ask of the work
Salinas runs from older houses with tired attics to newer tracts with rooms over the garage, and most of them need something fixed or sealed before more insulation helps.
Rooms over the garage
In Salinas tract homes the room over the garage is the usual complaint, so we seal where it meets the garage and attic before we insulate it.
Crawl spaces on low ground
The city maps flood hazard areas from FEMA's data, so in a crawl space on low ground we check for standing water and wet wood first.
Rentals between tenants
Landlords here often call while a unit sits empty, which makes pulling dirty insulation, sealing and refilling easier on everyone than working around a tenant.
Outside Salinas? Give us a call
We're based in Soledad and work in Salinas, Prunedale, Castroville and other cities around them, so pick yours from the list to see what we run into there.
If your city isn't listed, call (831) 315-4005 and ask, because the list shows the cities with their own page, not every place we go.
From your call to a finished job
I keep the estimate simple because you should know what you're paying for and why before anyone climbs into your attic, so I come out myself and write it all down.
Call or send the form
Call (831) 315-4005 or send the form with what's bothering you, and we get back to you to set up a visit.
I look myself
I come to your Salinas house and look at the attic, walls or crawl space in person, checking the inches up there, the vents, the gaps and anything wet.
Your written estimate
You get a written estimate that lists what I found, anything that needs fixing first and what I'd do, so you know what you're paying for.
Work and walk-through
If you go ahead, we line up any permit with the city, our crew does the work, and I walk the finished job with you.
Salinas insulation questions
How much does it cost to insulate an attic in Salinas?
The price of attic insulation in Salinas turns on four things: how many inches are already up there and what shape they're in, whether old material has to come out, how many gaps need sealing, and whether you go with foam or blown-in. Foam costs more and seals air while it insulates, but for most attics I'd seal the gaps and top up loose fill, unless your ductwork runs up there. The written estimate shows what I found and what I'd do first, so you can see where the money goes.
Where do I apply for a permit for insulation work in Salinas?
You apply online through the City of Salinas Community Development office on its permit site, where you set up a public account before paying fees and then use Apply for Permits. The same site lets you look up permit records and book inspections. When a job calls for a permit, we handle that paperwork as part of the job, and if it isn't clear whether yours needs one, we check with the office before we start.
Can an unlicensed handyman insulate my attic in Salinas?
Only on small jobs, and California's Contractors State License Board now puts that limit at $1,000, up from $500. The exemption holds only when the work needs no permit and the person employs no one on the project. Past that, you want a licensed contractor, and we're fully licensed and insured.
Who is allowed to haul away old insulation in Salinas?
In Salinas, construction debris has to go with the city's franchised hauler unless an exception applies, and one exception is debris a licensed contractor removes as an incidental part of its own work. So when we pull out old insulation, it leaves with us as part of the job. If you're tearing out insulation yourself, plan on the city's hauler.
How long does attic insulation take, and do we have to leave the house?
With blown-in insulation you can usually stay home while the crew works, and how long we're up there depends mostly on whether old material comes out first. Pulling out soaked or dirty insulation and sealing the gaps adds time, while a top-up over clean insulation goes faster. Spray foam is different, so you, the kids and the pets stay out until the re-entry time, when it's safe to come back, and I go over that time with you before we start.
How do I know if the old insulation in my Salinas attic should come out?
If it's dry and clean, it can usually stay and get topped up, but if it's been soaked, matted by a leak or full of droppings, it comes out first. Laying new material over old trouble just hides the problem, and I'd rather find it. When I'm up there I also measure what's in place and check that the eave vents aren't buried, because an attic that can't breathe shows moisture in the framing.
Plan your Salinas insulation job with us
We take calls seven days a week, into the evening, so call (831) 315-4005 or send the form when you're home and thinking about it.